No Access. Restricted.
No Access. Restricted.
Bombardier Q400 Preflight and Final Line Quality Supervisor (Nov. 2016 to Present). Supervise 25+ Preflight and Final Assembly Line (FAL) Quality Inspectors.•Q400 Quality Dept. COPQ (cost of poor quality) problem solving specialist.•Bombardier Q400 Cargo Combi conversion support.•On site support of MHICA built center fuse and wings for Bombardier Global Express in Downsview, On. •ATR72 cargo mod including internally mounted fuel storage tanks.•Final assembly Canadair CL415 including wing/fuse marry up, preflight structures mods/repairs.•Methods engineering consultant for Canadair CL415 aileron program main plant Montreal, QC.•Bombardier CRJ200 repair/overall C and D checks including all current service bulletins.•Mod line lead hand supervising crew of 20+ structures technicians.•Perform structural repairs to Boeing 727, 737, 757, Bombardier CRJ 200/700/900, Bombardier Global Express, Embraer 120 and General Dynamics Convair CV 580 aircraft.•Perform Boeing 737 Lap Joint Service Bulletins, corrosion prevention control program, D check.•Cargo door conversions to Convair CV 580 and HS 748, cargo door forward frame replacement 737 200 C•Prefit and completion of Sikorsky S76 helicopter carbon fiber interior cocoons.•Modify and complete Sikorsky S76 corporate, Medivac and SAR helicopters including FLIR, Night Sun and rescue hoist installations.
Aircraft Sheetmetal Trade Mechanic 4/Lead Hand Primary Business – Maintenance repair and overhaul of commercial jet and turboprop aircraft.•Performed structural repairs to Boeing 737, deHavilland Dash 8 and Fokker F27 aircraft.•Carried out service bulletins and airworthiness directives as well as employer requested modifications.•Fabricated and installed repair parts in accordance with structural repair manuals.•Performed repairs to deHavilland Dash 8 100, 200 and 300
Aircraft Structures Technician (Journeyman/Leadhand) Primary Business – Production of new wing design for deHavilland DHC-2 Beaver.•Lead Hand of production crew on aileron assembly.•Fabricated and assembled components (flaps, ailerons, main and outboard wing) according to drawing specifications.•Fit and installed flap and aileron control systems.•Gave direct input into design and fabrication of tooling for major assemblies.
Aircraft Sheetmetal Mechanic Primary Business – Regional commuter airline and charter service.•Routine inspection and repairs to airframe related components on General Dynamics Convair CV-580, Hawker Siddely HS 125-1A aircraft and Piper PA-31 Cheyenne Aircraft.•Fabricated and modified interior galley areas (baggage racks, commissary box holders, stainless steel waste units).•Performed routine mechanical inspections as well as assisted in critical mechanical repairs such as Q.E.C. (engine) changes, brake system overhauls, propeller changes etc.•Supervised contract structures personnel when required.•Supervised daily arrivals and departures including starting APU, fuel check, de-icing and D.I.
Aircraft Sheetmetal Mechanic Primary Business – Repair and overhaul of corporate and private aircraft.•Performed structural repairs to Fairchild Merlin Metro, Cessna Citation I, II, III, V, Hawker Siddely HS 125 Series 1A through 800, Learjet Series 25 through 35, Beechcraft King Air 100/200 and Astrajet aircraft.•Corrosion inspections and repair including replacement and repair of major structural components.
Aircraft Sheetmetal Technician Primary Business – Fabrication and assembly of aircraft structures.•Prefit and assembly of Canadair CL604 and CL601R vertical stabilizers on the line.•Duties included installing parts in jig fixture, drilling and reaming, riveting and installation of sub assembly components.
Aircraft Sheetmetal Assembler Primary Business – Manufacturer of aircraft and related components.•Prefit and assembly of aft fuselage section (APU housing) for Boeing 767 300 Series Aircraft•Prefit and installation of leading and trailing edge assemblies, electrical routing fasteners and upper and lower wing skins using detailed plans and blueprints on the Canadair Amphibious Aircraft CL-415 Water Bomber.
Bombardier Q400 Preflight and Final Line Quality Supervisor (Nov. 2016 to Present). Supervise 25+ Preflight and Final Assembly Line (FAL) Quality Inspectors.•Q400 Quality Dept. COPQ (cost of poor quality) problem solving specialist.•Bombardier Q400 Cargo Combi conversion support.•On site support of MHICA built center fuse and wings for Bombardier Global Express in Downsview, On. •ATR72 cargo mod including internally mounted fuel storage tanks.•Final assembly Canadair CL415 including wing/fuse marry up, preflight structures mods/repairs.•Methods engineering consultant for Canadair CL415 aileron program main plant Montreal, QC.•Bombardier CRJ200 repair/overall C and D checks including all current service bulletins.•Mod line lead hand supervising crew of 20+ structures technicians.•Perform structural repairs to Boeing 727, 737, 757, Bombardier CRJ 200/700/900, Bombardier Global Express, Embraer 120 and General Dynamics Convair CV 580 aircraft.•Perform Boeing 737 Lap Joint Service Bulletins, corrosion prevention control program, D check.•Cargo door conversions to Convair CV 580 and HS 748, cargo door forward frame replacement 737 200 C•Prefit and completion of Sikorsky S76 helicopter carbon fiber interior cocoons.•Modify and complete Sikorsky S76 corporate, Medivac and SAR helicopters including FLIR, Night Sun and rescue hoist installations.
Aircraft Sheetmetal Trade Mechanic 4/Lead Hand Primary Business – Maintenance repair and overhaul of commercial jet and turboprop aircraft.•Performed structural repairs to Boeing 737, deHavilland Dash 8 and Fokker F27 aircraft.•Carried out service bulletins and airworthiness directives as well as employer requested modifications.•Fabricated and installed repair parts in accordance with structural repair manuals.•Performed repairs to deHavilland Dash 8 100, 200 and 300
Aircraft Structures Technician (Journeyman/Leadhand) Primary Business – Production of new wing design for deHavilland DHC-2 Beaver.•Lead Hand of production crew on aileron assembly.•Fabricated and assembled components (flaps, ailerons, main and outboard wing) according to drawing specifications.•Fit and installed flap and aileron control systems.•Gave direct input into design and fabrication of tooling for major assemblies.
Aircraft Sheetmetal Mechanic Primary Business – Regional commuter airline and charter service.•Routine inspection and repairs to airframe related components on General Dynamics Convair CV-580, Hawker Siddely HS 125-1A aircraft and Piper PA-31 Cheyenne Aircraft.•Fabricated and modified interior galley areas (baggage racks, commissary box holders, stainless steel waste units).•Performed routine mechanical inspections as well as assisted in critical mechanical repairs such as Q.E.C. (engine) changes, brake system overhauls, propeller changes etc.•Supervised contract structures personnel when required.•Supervised daily arrivals and departures including starting APU, fuel check, de-icing and D.I.
Aircraft Sheetmetal Mechanic Primary Business – Repair and overhaul of corporate and private aircraft.•Performed structural repairs to Fairchild Merlin Metro, Cessna Citation I, II, III, V, Hawker Siddely HS 125 Series 1A through 800, Learjet Series 25 through 35, Beechcraft King Air 100/200 and Astrajet aircraft.•Corrosion inspections and repair including replacement and repair of major structural components.
Aircraft Sheetmetal Technician Primary Business – Fabrication and assembly of aircraft structures.•Prefit and assembly of Canadair CL604 and CL601R vertical stabilizers on the line.•Duties included installing parts in jig fixture, drilling and reaming, riveting and installation of sub assembly components.
Aircraft Sheetmetal Assembler Primary Business – Manufacturer of aircraft and related components.•Prefit and assembly of aft fuselage section (APU housing) for Boeing 767 300 Series Aircraft•Prefit and installation of leading and trailing edge assemblies, electrical routing fasteners and upper and lower wing skins using detailed plans and blueprints on the Canadair Amphibious Aircraft CL-415 Water Bomber.
ATG is focused on bringing proven, effective and reliable contractors to our aviation maintenance customers to get projects done from start to finish.
ATG is currently looking for the following requirement and it has the need to be filled:
Junior Composites
Project Duties:
•Develops lay-up and assembly set-ups and techniques for the fabrication of composite structural and
assemblies. Sets up and troubleshoots composite parts for assembly or layup.
•Assembles, lays up, or supports via autoclave, GFM, and other processes the fabrication of parts and
components. Identify nonconforming detail parts, assemblies and processes. Work with engineering to
improve manufacturing processes.
Skill Set & Experience Required:
High School GED or equivalent
1-3 years of experience or combination of education/experience
computer literate
Preferred Qualifications (Desired Skills/Experience):
• Knowledgeable and skilled in the use of raw materials, production processes, quality control, costs,
and other techniques for maximizing the effective manufacture of composite parts and assemblies.
Term:
One year
All ATG contracts have:
Attractive pay, dependent on experience
Paid weekly with no holdback of payments
Monthly royalties
Earn more with referrals
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status
Misc: Trades: Composites CertTec Trades: Licences: Certifications: Aircraft:ATG is focused on bringing proven, effective and reliable contractors to our aviation maintenance customers to get projects done from start to finish.
ATG is currently looking for the following requirement and it has the need to be filled:
Mechanics
Project Duties:
-teardown and inspection.
– build-up and test of assemblies and sub-assemblies on various components associated with the
AH-64D Longbow Apache.
-Perform all maintenance and repair tasks within the budgeted hours and scheduled time
allotted for completion.
Skill Set & Experience Required:
-Experience on AH-64D Apache helicopter
– 3-5 years of experience performing maintenance on AH-64D
-able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures
-experience on building up and testing of assemblies and sub-assemblies associated with the AH-64D Longbow Apache
Term: One year
All ATG contracts have:
Attractive pay, dependent on experience
Paid weekly with no holdback of payments
Monthly royalties
Earn more with referrals
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status
Misc: Trades: Mechanic CertTec Trades: Licences: Certifications: Aircraft: AH-64DATG is focused on bringing proven, effective and reliable contractors to our aviation maintenance customers to get projects done from start to finish.
ATG is currently looking for the following requirement and it has the need to be filled urgently:
A&Ps, Quality Inspector, Avionics, Structures, Painters, and GSE needed in Oklahoma
Project Duties:
– C checks on DHC-8s
– C checks on BBJ 737 C40s
Skill Set & Experience Required:
– 5 years industry experience in aviation maintenance
– Only having experience working on DHC-8s or BBBJ 737 C40 is the minimum requirement
– A&P license is considered an asset
Additional Details:
Term: Open ended
Tools are required and must be etched and shadowed
All ATG contract have:
Attractive pay, dependent on experience
Paid weekly with no holdback of payments
Monthly royalties
Earn more with referrals
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status
Misc: Trades: AP Mechanic, Mechanic, Avionics Tech, Structure Tech, Inspector, Painter, Interiors CertTec Trades: Licences: Certifications: Aircraft: DHC-8 Dash 8 100/200/300, Boeing 737, Boeing 737-200ATG is focused on bringing proven, effective and reliable contractors to our aviation maintenance customers to get projects done from start to finish.
ATG is currently looking for the following requirement and it has the need to be filled urgently:
A&Ps, Quality Inspector, Avionics, Structures, Painters, and GSE needed in Arkansas
Project Duties:
– C checks on DHC-8s
Skill Set & Experience Required:
– 5 years industry experience in aviation maintenance
– Only having experience working on DHC-8s is the minimum requirement
– A&P license is considered an asset
Additional Details:
Term: Open ended
Tools are required and must be etched and shadowed
All ATG contract have:
Attractive pay, dependent on experience
Paid weekly with no holdback of payments
Monthly royalties
Earn more with referrals
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status
Misc: Trades: Mechanic, AP Mechanic, Inspector, Avionics Tech CertTec Trades: Licences: Certifications: Aircraft: DHC-8 Dash 8 100/200/300ATG is focused on bringing proven, effective and reliable contractors to our aviation maintenance customers to get projects done from start to finish.
ATG is currently looking for the following requirement and it has the need to be filled urgently:
Mechanics, Structures, and Inspectors Technicians
Project Duties:
– Heavy maintenance
– A and C-checks
Skill Set & Experience Required:
– Experience with Falcon 2000x, Q400, DHC-8, or CRJs is mandatory
– Minimum 5 years experience is an asset
– AME-M2 license for mechanic positions is an asset
– AME-S License is an asset for structures/sheetmetal positions
– Q400 or DHC-8 endorsement is an asset
Additional Details:
Term: Open ended
Accommodation can be provided and travel allowance available
Must have tools to perform all required duties
All ATG contract have:
Attractive pay, dependent on experience
Paid weekly with no holdback of payments
Monthly royalties
Earn more with referrals
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status
Misc: Trades: Mechanic, Structure Tech, Inspector CertTec Trades: Licences: Certifications: Aircraft: